- Carbide saw tips
Carbide saw tips
Carbide saw tips allow multiple sharpening and long service life for saw mill cutting applications benefit from its excellent wear & corrosion resistant properties.
We supply carbide saw tips with different grades and sizes for a variety of applications, such wood, plastic, non-ferrous metals and stainless steels cutting. Our fine and submicron structure grades combined with the special metallurgical formulation of binder create a extremely wear resistant specially to cutting sandwich board and composite materials.
If you would like to learn more about our carbide grades for saw tips, please click on HERE to browse the grade page.
A comprehensive standard selection of saw tips in various dimensions is available in the below tables, but other sizes, tolerances & configurations also available on request.
Contact us if what you need is not shown here.
Introduction
Carbide saw tips are specialized cutting tools used in various industries, particularly in woodworking, metalworking, and construction. These tips are made from a compound known as carbide, which is a combination of tungsten and carbon. The resulting material is extremely hard and durable, making it ideal for applications that involve cutting through tough materials.
Composition and Structure
The composition of carbide saw tips can vary depending on the specific application and requirements. Different grades of carbide are available, with varying tungsten carbide content and binder proportions, allowing manufacturers to tailor the properties of the saw tips to suit different cutting needs.
The structure of carbide saw tips is typically a combination of tungsten carbide particles dispersed within a cobalt matrix. The tungsten carbide particles form the cutting edges of the saw tip, while the cobalt matrix provides support and strength. The distribution and arrangement of the tungsten carbide particles can vary, depending on the specific design and cutting requirements of the saw tip.
Hardness
Carbide saw tips are exceptionally hard, often ranking higher on the Mohs scale of hardness than other cutting materials like steel. Tungsten carbide, the main component of carbide tips, is one of the hardest materials known. This hardness allows the tips to maintain their cutting edges and resist wear, resulting in longer tool life and improved cutting performance.
Wear Resistance
Carbide saw tips exhibit excellent wear resistance, even when cutting through abrasive materials or performing high-speed cutting operations. The hardness and composition of carbide enable it to withstand the wear caused by the contact with the workpiece and the heat generated during cutting. This property extends the lifespan of the saw tips and reduces the frequency of tool replacements.
Strength and Toughness
Although carbide is extremely hard, it can be brittle. To enhance the overall strength and toughness of carbide saw tips, a metallic binder, typically cobalt, is used. The binder adds toughness and impact resistance, preventing the carbide from chipping or fracturing under heavy loads or sudden impacts. This combination of hardness and toughness allows carbide tips to endure demanding cutting conditions.
Heat Resistance
Carbide saw tips have excellent heat resistance, which is essential for cutting applications that generate high temperatures. The material can withstand the heat generated during cutting, preventing premature wear, and maintaining the sharpness of the cutting edge. The heat resistance of carbide also helps to reduce the risk of tool deformation or damage during prolonged use.
Chemical Stability
Carbide saw tips exhibit good chemical stability, making them resistant to corrosion or chemical reactions with various workpiece materials. This property allows carbide tips to be used for cutting applications involving different types of materials, including wood, metals, plastics, and composites.
Versatility
Carbide saw tips are highly versatile and can be used for cutting a wide range of materials, from softwoods to hardwoods, non-ferrous metals, and even some ferrous metals. Their ability to maintain sharpness and perform well across various materials makes them suitable for different industries and applications.
Powder Preparation
Tungsten carbide and cobalt powders are produced separately and carefully mixed.
Mixing
The tungsten carbide and cobalt powders are carefully mixed in predetermined proportions.
Pressing
Mixed powder is compacted under high pressure to form green compacts.
Pre-Sintering
Green compacts are partially densified through low-temperature sintering.
Shaping and Machining
Compacts are shaped and machined to achieve final dimensions and cutting edge geometry.
Final Sintering
Compacts undergo high-temperature sintering to form dense and solid structures.
Finishing and Coating
Additional processes such as grinding, polishing, and coating are applied for improved performance.
Quality Control
Stringent measures are implemented to ensure final carbide saw tips meet specifications.
Carbide saw tips are made of a compound called cemented carbide, which consists of tungsten carbide particles and a metallic binder, typically cobalt.
The lifespan of carbide saw tips can vary depending on factors such as the type of material being cut, cutting conditions, and maintenance. However, carbide saw tips generally last much longer than traditional steel saw blades, providing extended tool life and reducing the frequency of replacements.
Yes, carbide saw tips can be sharpened. However, it requires specialized equipment and expertise due to the hardness of the material. It is often more practical and cost-effective to replace the tips when they become dull or worn.
Carbide saw tips can cut a wide range of materials, including hardwood, softwood, plastics, non-ferrous metals (such as aluminum and copper), and some ferrous metals. Their versatility makes them suitable for various industries and applications.
Yes, carbide saw tips are well-suited for high-speed cutting operations. Their hardness and heat resistance allow them to withstand the increased cutting speeds and temperatures associated with high-speed cutting, providing efficient and precise results.
Yes, carbide saw tips can be used in hand-held tools like circular saws and jigsaws. They offer enhanced cutting performance and durability, making them popular choices for professionals and DIY enthusiasts using portable cutting tools.
Carbide saw tips are generally more expensive than traditional steel saw blades. However, their longer tool life and improved cutting performance often justify the higher initial cost, as they reduce downtime and the need for frequent blade replacements.
Yes, carbide saw tips are well-suited for fine, precision cuts. Their hardness and sharp cutting edges enable clean and accurate cuts, making them suitable for applications that require high precision, such as detailed woodworking and intricate metalwork.
Yes, carbide saw tips can be used in wet cutting applications. However, it is essential to ensure proper coolant and lubrication to prevent overheating and maintain cutting performance.
Yes, carbide saw tips can be recycled. The tungsten carbide and cobalt materials can be reclaimed and reused in the production of new carbide products, promoting sustainability and reducing environmental impact.
Data
*The width (W) can be customized according to your needs
| Part No. | L/mm | T/mm | W/mm | T1/mm | α° | β° |
|---|---|---|---|---|---|---|
| ST-EU-4515 | 4.5 | 1.50 | w | 0.70 | 28.00 | 45.00 |
| ST-EU-5015 | 5.0 | 1.50 | w | 1.00 | 28.00 | 45.00 |
| ST-EU-5515 | 5.5 | 1.50 | w | 1.00 | 30.00 | 45.00 |
| ST-EU-6018 | 6.0 | 1.80 | w | 1.20 | 28.00 | 45.00 |
| ST-EU-6020 | 6.0 | 2.00 | w | 1.40 | 28.00 | 45.00 |
| ST-EU-6520 | 6.5 | 2.00 | w | 1.40 | 28.00 | 45.00 |
| ST-EU-7020 | 7.0 | 2.00 | w | 1.20 | 28.00 | 45.00 |
| ST-EU-7022 | 7.0 | 2.20 | w | 1.80 | 28.00 | 70.00 |
| ST-EU-7520 | 7.5 | 2.00 | w | 1.20 | 28.00 | 45.00 |
| ST-EU-8023 | 8.0 | 2.30 | w | 1.50 | 28.00 | 56.00 |
| ST-EU-8525 | 8.5 | 2.50 | w | 1.25 | 28.00 | 45.00 |
| ST-EU-8535 | 8.5 | 3.50 | w | 2.00 | 25.00 | 56.00 |
| ST-EU-9025 | 9.0 | 2.50 | w | 1.46 | 20.00 | 57.00 |
| ST-EU-10025 | 10.0 | 2.50 | w | 1.60 | 20.00 | 67.00 |
| ST-EU-10030 | 10.0 | 3.00 | w | 1.60 | 15.00 | 72.00 |
| ST-EU-10525 | 10.5 | 2.50 | w | 1.30 | 28.00 | 45.00 |
| ST-EU-10530 | 10.5 | 3.00 | w | 1.70 | 30.00 | 50.00 |
| ST-EU-10535 | 10.5 | 3.50 | w | 2.40 | 28.00 | 45.00 |
| ST-EU-12035 | 12.0 | 3.50 | w | 2.40 | 30.00 | 45.00 |
| ST-EU-12540 | 12.5 | 4.00 | w | 2.70 | 30.00 | 70.00 |
| ST-EU-13050 | 13.0 | 5.00 | w | 3.30 | 35.00 | 45.00 |
| ST-EU-13540 | 13.5 | 4.00 | w | 2.70 | 25.00 | 0.00 |
| Part No. | L/mm | L/inch | W/mm | W/inch | T/mm | T/inch |
|---|---|---|---|---|---|---|
| ST-US-I-250-062 | 6.35 | 0.250 | 1.27 to 12.70 | 0.050 to 0.500 | 1.57 | 0.062 |
| ST-US-I-281-078 | 7.14 | 0.281 | 1.27 to 12.70 | 0.050 to 0.500 | 1.98 | 0.078 |
| ST-US-I-281-093 | 7.14 | 0.281 | 1.27 to 12.70 | 0.050 to 0.500 | 2.36 | 0.093 |
| ST-US-I-321-093 | 7.92 | 0.321 | 1.27 to 20.32 | 0.050 to 0.800 | 2.36 | 0.093 |
| ST-US-I-375-093 | 9.53 | 0.375 | 1.27 to 20.32 | 0.050 to 0.800 | 2.36 | 0.093 |
| ST-US-I-500-125 | 12.70 | 0.500 | 1.27 to 20.32 | 0.050 to 0.800 | 3.18 | 0.125 |
| ST-US-I-375-125 | 9.53 | 0.375 | 1.27 to 20.32 | 0.050 to 0.800 | 3.18 | 0.125 |
| ST-US-I-344-125 | 8.74 | 0.344 | 1.27 to 20.32 | 0.050 to 0.800 | 3.18 | 0.125 |
| ST-US-I-375-156 | 9.53 | 0.375 | 1.27 to 20.32 | 0.050 to 0.800 | 3.96 | 0.156 |
| Part No. | L/mm | L/inch | W/mm | W/inch | T/mm | T/inch |
|---|---|---|---|---|---|---|
| ST-US-II-281-078 | 7.14 | 0.281 | 1.27 to 12.70 | 0.050 to 0.500 | 1.98 | 0.078 |
| ST-US-II-312-093 | 7.92 | 0.312 | 1.27 to 12.70 | 0.050 to 0.500 | 2.36 | 0.093 |
| ST-US-II-375-093 | 9.53 | 0.375 | 1.27 to 12.70 | 0.050 to 0.500 | 2.36 | 0.093 |
| ST-US-II-500-125 | 12.70 | 0.500 | 1.27 to 20.32 | 0.050 to 0.800 | 3.18 | 0.125 |
| ST-US-II-375-125 | 9.53 | 0.375 | 1.27 to 20.32 | 0.050 to 0.800 | 3.18 | 0.125 |
| ST-US-II-344-125 | 8.74 | 0.344 | 1.27 to 20.32 | 0.050 to 0.800 | 3.18 | 0.125 |
| Part No. | L/mm | L/inch | W/mm | W/inch | T/mm | T/inch |
|---|---|---|---|---|---|---|
| ST-US-III-250-062 | 6.35 | 0.250 | 1.65 to 5.46 | 0.065 to 0.215 | 1.57 | 0.062 |
| ST-US-III-281-078 | 7.14 | 0.281 | 2.16 to 7.92 | 0.085 to 0.312 | 1.98 | 0.078 |
| ST-US-III-281-093 | 7.14 | 0.281 | 2.54 to 6.35 | 0.100 to 0.250 | 2.36 | 0.093 |
| ST-US-III-321-093 | 7.92 | 0.321 | 2.54 to 7.92 | 0.100 to 0.312 | 2.36 | 0.093 |
| ST-US-III-375-093 | 9.53 | 0.375 | 3.81 to 9.53 | 0.150 to 0.375 | 2.36 | 0.093 |
| ST-US-III-500-125 | 12.70 | 0.500 | 3.81 to 9.53 | 0.150 to 0.375 | 3.18 | 0.125 |
| ST-US-III-375-125 | 9.53 | 0.375 | 3.81 to 19.05 | 0.150 to 0.750 | 3.18 | 0.125 |
| ST-US-III-344-125 | 8.74 | 0.344 | 3.18 to 7.62 | 0.125 to 0.300 | 3.18 | 0.125 |
| ST-US-III-375-156 | 9.53 | 0.375 | 4.32 to 9.53 | 0.170 to 0.375 | 3.96 | 0.156 |
| Part No. | L/mm | S/mm | α1° | α2° | R/mm |
|---|---|---|---|---|---|
| ST-A-6019 | 6.0 | 1.90 | 30 | 45.00 | 0.95 |
| ST-A-8338 | 8.3 | 3.80 | 30 | / | 1.90 |
| ST-A-6020 | 6.0 | 2.00 | 27.47 | / | 2-0.5*45° |
| ST-A-6319 | 6.3 | 1.90 | 38 | / | 0.95 |
| ST-A-6120 | 6.1 | 2.00 | 34 | / | 1.00 |
| ST-A-6519 | 6.5 | 1.90 | 24 | 38.00 | 0.95 |
| ST-A-6522 | 6.5 | 2.20 | 42.36 | / | 0.80 |
The width (W) can be customized according to your needs
| Part No. | L/mm | S/mm | α° | β° | L1/mm | R/mm |
|---|---|---|---|---|---|---|
| ST-B-3015-60-113 | 3.0 | 1.50 | 60 | 11.30 | 1.00 | 0.50 |
| ST-B-3016-60-113 | 3.0 | 1.60 | 60 | 11.30 | 1.00 | 0.50 |
| ST-B-3018-60-113 | 3.0 | 1.80 | 60 | 11.30 | 1.00 | 0.50 |
| ST-B-4014-60-11 | 4.0 | 1.40 | 60 | 11.00 | 1.00 | 0.50 |
| ST-B-4018-60-11 | 4.0 | 1.80 | 60 | 11.00 | 1.00 | 0.50 |
| ST-B-4314-63-15 | 4.3 | 1.40 | 63 | 15.00 | 1.40 | 0.50 |
| ST-B-4514-60-20 | 4.5 | 1.40 | 60 | 20.00 | 1.00 | 0.50 |
| ST-B-4514-65-20 | 4.5 | 1.40 | 65 | 20.00 | 1.00 | 0.50 |
| ST-B-4514-70-20 | 4.5 | 1.40 | 70 | 20.00 | 1.00 | 0.50 |
| ST-B-4515-60-20 | 4.5 | 1.50 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-4515-60-27 | 4.5 | 1.50 | 60 | 27.00 | 1.00 | 0.50 |
| ST-B-4515-62-36 | 4.5 | 1.50 | 62 | 36.00 | 0.85 | 0.60 |
| ST-B-4515-62-45 | 4.5 | 1.50 | 62 | 45.00 | 1.50 | 0.50 |
| ST-B-4515-75-20 | 4.5 | 1.50 | 75 | 20.00 | 1.37 | 0.50 |
| ST-B-4517-65-20 | 4.5 | 1.70 | 65 | 20.00 | 1.50 | 0.30 |
| ST-B-4520-75-17 | 4.5 | 2.00 | 75 | 17.00 | 1.60 | 0.50 |
| ST-B-4614-65-20 | 4.6 | 1.40 | 65 | 20.00 | 1.00 | 0.50 |
| ST-B-4615-60-27 | 4.6 | 1.50 | 60 | 27.00 | 1.00 | 0.50 |
| ST-B-4714-60-20 | 4.7 | 1.40 | 60 | 20.00 | 1.55 | 0.50 |
| ST-B-4714-65-20 | 4.7 | 1.40 | 65 | 20.00 | 1.00 | 0.50 |
| ST-B-4714-65-265 | 4.7 | 1.40 | 65 | 26.50 | 1.00 | 0.50 |
| ST-B-4715-65-265 | 4.7 | 1.50 | 65 | 26.50 | 1.00 | 0.50 |
| ST-B-4716-65-265 | 4.7 | 1.60 | 65 | 26.50 | 1.00 | 0.50 |
| ST-B-4814-65-20 | 4.8 | 1.40 | 65 | 20.00 | 1.51 | 0.50 |
| ST-B-4815-59-1269 | 4.8 | 1.50 | 59 | 12.69 | 2.00 | 0.50 |
| ST-B-4815-60-20 | 4.8 | 1.50 | 60 | 20.00 | 1.00 | 0.50 |
| ST-B-4815-60-20 | 4.8 | 1.50 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-4815-63-20 | 4.8 | 1.50 | 63 | 20.00 | 1.40 | 0.50 |
| ST-B-4815-65-11 | 4.8 | 1.50 | 65 | 11.00 | 1.50 | 0.50 |
| ST-B-4816-45-55 | 4.8 | 1.60 | 45 | 55.00 | 0.42 | 0.50 |
| ST-B-4816-60-32 | 4.8 | 1.60 | 60 | 32.00 | 0.80 | 0.50 |
| ST-B-4816-65-20 | 4.8 | 1.60 | 65 | 20.00 | 1.79 | 0.40 |
| ST-B-5014-65-11 | 5.0 | 1.40 | 65 | 11.00 | 1.50 | 0.50 |
| ST-B-5014-65-20 | 5.0 | 1.40 | 65 | 20.00 | 1.51 | 0.30 |
| ST-B-50153-55-20 | 5.0 | 1.53 | 55 | 20.00 | 1.37 | 0.50 |
| ST-B-5015-55-15 | 5.0 | 1.50 | 55 | 15.00 | 1.49 | 0.30 |
| ST-B-5015-60-15 | 5.0 | 1.50 | 60 | 15.00 | 1.50 | 0.50 |
| ST-B-5015-60-19 | 5.0 | 1.50 | 60 | 19.00 | 1.50 | 0.50 |
| ST-B-5015-60-20R45 | 5.0 | 1.50 | 60 | 20.00 | 1.10 | 0.5*45° |
| ST-B-5015-60-20 | 5.0 | 1.50 | 60 | 20.00 | 1.10 | 0.50 |
| ST-B-5015-60-22 | 5.0 | 1.50 | 60 | 22.00 | 1.20 | 0.50 |
| ST-B-5015-62-25 | 5.0 | 1.50 | 62 | 25.00 | 1.07 | 0.50 |
| ST-B-5015-70-20R45 | 5.0 | 1.50 | 70 | 20.00 | 1.10 | 0.5*45° |
| ST-B-5015-70-20 | 5.0 | 1.50 | 70 | 20.00 | 1.10 | 0.50 |
| ST-B-5015-70-20L | 5.0 | 1.50 | 70 | 20.00 | 1.50 | 0.50 |
| ST-B-5015-73-18 | 5.0 | 1.50 | 73 | 18.00 | 2.00 | 0.50 |
| ST-B-50165-65-20 | 5.0 | 1.65 | 65 | 20.00 | 1.37 | 0.60 |
| ST-B-5016-60-14 | 5.0 | 1.60 | 60 | 14.00 | 2.00 | 0.50 |
| ST-B-5016-60-20 | 5.0 | 1.60 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-5016-595-25 | 5.0 | 1.60 | 59.5 | 25.00 | 1.07 | 0.50 |
| ST-B-5016-62-18 | 5.0 | 1.60 | 62 | 18.00 | 1.50 | 0.50 |
| ST-B-5016-65-20 | 5.0 | 1.60 | 65 | 20.00 | 1.79 | 0.40 |
| ST-B-5016-70-20 | 5.0 | 1.60 | 70 | 20.00 | 1.40 | 0.50 |
| ST-B-5016-70-20L | 5.0 | 1.60 | 70 | 20.00 | 1.90 | 0.50 |
| ST-B-5016-75-20 | 5.0 | 1.60 | 75 | 20.00 | 1.37 | 0.50 |
| ST-B-5017-60-20 | 5.0 | 1.70 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-5017-62-18 | 5.0 | 1.70 | 62 | 18.00 | 1.50 | 0.50 |
| ST-B-5017-65-20 | 5.0 | 1.70 | 65 | 20.00 | 1.92 | 0.40 |
| ST-B-5017-72-27 | 5.0 | 1.70 | 72 | 27.00 | 1.20 | 0.50 |
| ST-B-5017-75-15 | 5.0 | 1.70 | 75 | 15.00 | 1.20 | 0.50 |
| ST-B-5018-70-20 | 5.0 | 1.80 | 70 | 20.00 | 1.40 | 0.50 |
| ST-B-5020-75-30R45 | 5.0 | 2.00 | 75 | 30.00 | 0.87 | 0.5*45° |
| ST-B-5216-60-20 | 5.2 | 1.60 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-5216-65-20 | 5.2 | 1.60 | 65 | 20.00 | 1.79 | 0.40 |
| ST-B-5216-70-20 | 5.2 | 1.60 | 70 | 20.00 | 1.40 | 0.50 |
| ST-B-5217-60-20 | 5.2 | 1.70 | 60 | 20.00 | 1.10 | 0.50 |
| ST-B-5217-70-20 | 5.2 | 1.70 | 70 | 20.00 | 1.40 | 0.50 |
| ST-B-5315-60-20 | 5.3 | 1.50 | 60 | 20.00 | 1.10 | 0.50 |
| ST-B-5315-60-20L1 | 5.3 | 1.50 | 60 | 20.00 | 1.30 | 0.50 |
| ST-B-5315-60-20L2 | 5.3 | 1.50 | 60 | 20.00 | 1.90 | 0.50 |
| ST-B-5315-75-20 | 5.3 | 1.50 | 75 | 20.00 | 1.10 | 0.50 |
| ST-B-5316-60-20 | 5.3 | 1.60 | 60 | 20.00 | 1.90 | 0.50 |
| ST-B-5316-60-25 | 5.3 | 1.60 | 60 | 25.00 | 1.07 | 0.50 |
| ST-B-5316-63-20 | 5.3 | 1.60 | 63 | 20.00 | 1.60 | 0.50 |
| ST-B-5316-65-20 | 5.3 | 1.60 | 65 | 20.00 | 0.70 | 0.50 |
| ST-B-5316-65-20L | 5.3 | 1.60 | 65 | 20.00 | 1.79 | 0.40 |
| ST-B-5316-70-20 | 5.3 | 1.60 | 70 | 20.00 | 1.10 | 0.50 |
| ST-B-5317-70-45 | 5.3 | 1.70 | 70 | 45.00 | 0.80 | 0.50 |
| ST-B-5318-65-20 | 5.3 | 1.80 | 65 | 20.00 | 1.92 | 0.40 |
| ST-B-5417-60-20 | 5.4 | 1.70 | 60 | 20.00 | 1.31 | 0.50 |
| ST-B-5417-70-20 | 5.4 | 1.70 | 70 | 20.00 | 1.40 | 0.50 |
| ST-B-5515-62-20 | 5.5 | 1.50 | 62 | 20.00 | 1.10 | 0.50 |
| ST-B-5515-65-15 | 5.5 | 1.50 | 65 | 15.00 | 1.50 | 0.50 |
| ST-B-5516-60-14 | 5.5 | 1.60 | 60 | 14.00 | 1.60 | 0.50 |
| ST-B-5516-60-20 | 5.5 | 1.60 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-5516-60-2125 | 5.5 | 1.60 | 60 | 21.25 | 1.80 | 0.50 |
| ST-B-5516-60-25 | 5.5 | 1.60 | 60 | 25.00 | 1.07 | 0.50 |
| ST-B-5516-62-18 | 5.5 | 1.60 | 62 | 18.00 | 1.65 | 0.50 |
| ST-B-5516-70-14 | 5.5 | 1.60 | 70 | 14.00 | 1.60 | 0.50 |
| ST-B-5516-70-20 | 5.5 | 1.60 | 70 | 20.00 | 1.40 | 0.50 |
| ST-B-5516-70-20LR45 | 5.5 | 1.60 | 70 | 20.00 | 1.51 | 0.5*45° |
| ST-B-5517-60-17 | 5.5 | 1.70 | 60 | 17.00 | 1.70 | 0.50 |
| ST-B-5517-60-18 | 5.5 | 1.70 | 60 | 18.00 | 2.00 | 0.50 |
| ST-B-5517-60-20LR | 5.5 | 1.70 | 60 | 20.00 | 1.37 | 0.60 |
| ST-B-5517-60-20L | 5.5 | 1.70 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-5517-60-20 | 5.5 | 1.70 | 60 | 20.00 | 1.90 | 0.50 |
| ST-B-5517-60-21 | 5.5 | 1.70 | 60 | 21.00 | 1.80 | 0.50 |
| ST-B-5517-60-21L | 5.5 | 1.70 | 60 | 21.00 | 2.00 | 0.50 |
| ST-B-5517-60-25 | 5.5 | 1.70 | 60 | 25.00 | 1.29 | 0.50 |
| ST-B-5517-62-16 | 5.5 | 1.70 | 62 | 16.00 | 1.70 | 0.50 |
| ST-B-5517-62-168 | 5.5 | 1.70 | 62 | 16.80 | 1.65 | 0.50 |
| ST-B-5517-65-20 | 5.5 | 1.70 | 65 | 20.00 | 1.80 | 0.50 |
| ST-B-5517-65-21 | 5.5 | 1.70 | 65 | 21.00 | 2.00 | 0.50 |
| ST-B-5517-75-20 | 5.5 | 1.70 | 75 | 20.00 | 1.37 | 0.50 |
| ST-B-5518-58-1963 | 5.5 | 1.80 | 58 | 19.63 | 2.00 | 0.50 |
| ST-B-5518-60-20 | 5.5 | 1.80 | 60 | 20.00 | 1.30 | 0.50 |
| ST-B-5518-60-25 | 5.5 | 1.80 | 60 | 25.00 | 1.29 | 0.50 |
| ST-B-5518-60-29 | 5.5 | 1.80 | 60 | 29.00 | 1.10 | 0.50 |
| ST-B-5518-62-18 | 5.5 | 1.80 | 62 | 18.00 | 2.20 | 0.50 |
| ST-B-5518-70-20 | 5.5 | 1.80 | 70 | 20.00 | 1.40 | 0.50 |
| ST-B-55185-70-20 | 5.5 | 1.85 | 70 | 20.00 | 1.40 | 0.50 |
| ST-B-5518-75-18 | 5.5 | 1.80 | 75 | 18.00 | 1.80 | 0.50 |
| ST-B-5518-75-20 | 5.5 | 1.80 | 75 | 20.00 | 1.65 | 0.50 |
| ST-B-5520-60-20 | 5.5 | 2.00 | 60 | 20.00 | 1.37 | 0.60 |
| ST-B-5520-62-25 | 5.5 | 2.00 | 62 | 25.00 | 1.30 | 0.50 |
| ST-B-5520-70-20 | 5.5 | 2.00 | 70 | 20.00 | 1.50 | 0.50 |
| ST-B-5524-60-20 | 5.5 | 2.40 | 60 | 20.00 | 1.37 | 0.60 |
| ST-B-5716-60-20R45 | 5.7 | 1.60 | 60 | 20.00 | 1.40 | 0.5*45° |
| ST-B-5716-60-20 | 5.7 | 1.60 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-5716-60-218 | 5.7 | 1.60 | 60 | 21.80 | 0.50 | 0.50 |
| ST-B-5717-60-20 | 5.7 | 1.70 | 60 | 20.00 | 1.37 | 0.60 |
| ST-B-5717-62-20 | 5.7 | 1.70 | 62 | 20.00 | 1.60 | 0.50 |
| ST-B-5717-70-20R45 | 5.7 | 1.70 | 70 | 20.00 | 1.37 | 0.5*45° |
| ST-B-5718-65-20 | 5.7 | 1.80 | 65 | 20.00 | 1.92 | 0.40 |
| ST-B-5722-60-20 | 5.7 | 2.20 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-5816-60-18 | 5.8 | 1.60 | 60 | 18.00 | 1.80 | 0.50 |
| ST-B-5816-65-265 | 5.8 | 1.60 | 65 | 26.50 | 1.00 | 0.50 |
| ST-B-5817-60-20 | 5.8 | 1.70 | 60 | 20.00 | 1.90 | 0.50 |
| ST-B-5817-60-218 | 5.8 | 1.70 | 60 | 21.80 | 2.00 | 0.50 |
| ST-B-5817-70-20 | 5.8 | 1.70 | 70 | 20.00 | 1.37 | 0.50 |
| ST-B-5818-60-15 | 5.8 | 1.80 | 60 | 15.00 | 1.38 | 0.50 |
| ST-B-5818-60-15L | 5.8 | 1.80 | 60 | 15.00 | 2.80 | 0.50 |
| ST-B-5818-60-20 | 5.8 | 1.80 | 60 | 20.00 | 1.20 | 0.50 |
| ST-B-5818-60-20L | 5.8 | 1.80 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-5818-60-45 | 5.8 | 1.80 | 60 | 45.00 | 0.75 | 0.40 |
| ST-B-5818-70-20 | 5.8 | 1.80 | 70 | 20.00 | 1.40 | 0.50 |
| ST-B-5818-70-25 | 5.8 | 1.80 | 70 | 25.00 | 1.60 | 0.50 |
| ST-B-5819-60-25 | 5.8 | 1.90 | 60 | 25.00 | 1.60 | 0.50 |
| ST-B-5820-65-20 | 5.8 | 2.00 | 65 | 20.00 | 1.90 | 0.50 |
| ST-B-60165-65-20 | 6.0 | 1.65 | 65 | 20.00 | 1.37 | 0.60 |
| ST-B-6016-60-20 | 6.0 | 1.60 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-6016-62-14 | 6.0 | 1.60 | 62 | 14.00 | 2.40 | 0.50 |
| ST-B-6016-62-20R45 | 6.0 | 1.60 | 62 | 20.00 | 1.65 | 0.5*45° |
| ST-B-6017-60-14 | 6.0 | 1.70 | 60 | 14.00 | 2.00 | 0.50 |
| ST-B-6017-60-20 | 6.0 | 1.70 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-6017-60-2076 | 6.0 | 1.70 | 60 | 20.76 | 2.20 | 0.50 |
| ST-B-6017-70-14 | 6.0 | 1.70 | 70 | 14.00 | 2.00 | 0.50 |
| ST-B-6018-60-20 | 6.0 | 1.80 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-6018-60-20R45 | 6.0 | 1.80 | 60 | 20.00 | 1.40 | 0.5*45° |
| ST-B-6018-60-20L | 6.0 | 1.80 | 60 | 20.00 | 1.65 | 0.60 |
| ST-B-6018-60-20LR | 6.0 | 1.80 | 60 | 20.00 | 1.65 | 0.50 |
| ST-B-6018-60-24 | 6.0 | 1.80 | 60 | 24.00 | 1.80 | 0.50 |
| ST-B-6018-62-16 | 6.0 | 1.80 | 62 | 16.00 | 2.40 | 0.50 |
| ST-B-6018-65-20 | 6.0 | 1.80 | 65 | 20.00 | 2.50 | 0.50 |
| ST-B-6018-65-24 | 6.0 | 1.80 | 65 | 24.00 | 1.80 | 0.50 |
| ST-B-6018-65-19 | 6.0 | 1.80 | 65 | 19.00 | 2.00 | 0.50 |
| ST-B-6018-70-19 | 6.0 | 1.80 | 70 | 19.00 | 2.00 | 0.50 |
| ST-B-6018-70-20 | 6.0 | 1.80 | 70 | 20.00 | 1.50 | 0.50 |
| ST-B-6018-75-20 | 6.0 | 1.80 | 75 | 20.00 | 1.65 | 0.50 |
| ST-B-6019-60-17 | 6.0 | 1.90 | 60 | 17.00 | 2.00 | 0.50 |
| ST-B-6019-70-17 | 6.0 | 1.90 | 70 | 17.00 | 2.00 | 0.50 |
| ST-B-6020-60-17 | 6.0 | 2.00 | 60 | 17.00 | 2.30 | 0.50 |
| ST-B-6020-60-20 | 6.0 | 2.00 | 60 | 20.00 | 1.30 | 0.50 |
| ST-B-6020-60-20L | 6.0 | 2.00 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-6020-60-20L2 | 6.0 | 2.00 | 60 | 20.00 | 1.80 | 0.50 |
| ST-B-6020-62-18 | 6.0 | 2.00 | 62 | 18.00 | 2.40 | 0.50 |
| ST-B-6020-62-20 | 6.0 | 2.00 | 62 | 20.00 | 2.42 | 0.50 |
| ST-B-6020-65-18 | 6.0 | 2.00 | 65 | 18.00 | 2.40 | 0.50 |
| ST-B-6020-68-30R45 | 6.0 | 2.00 | 68 | 30.00 | 1.04 | 0.5*45° |
| ST-B-6020-70-13 | 6.0 | 2.00 | 70 | 13.00 | 2.50 | 0.50 |
| ST-B-6020-70-20 | 6.0 | 2.00 | 70 | 20.00 | 1.60 | 0.50 |
| ST-B-6022-60-19 | 6.0 | 2.20 | 60 | 19.00 | 2.03 | 0.50 |
| ST-B-6022-75-20 | 6.0 | 2.20 | 75 | 20.00 | 1.40 | 0.50 |
| ST-B-6025-55-218R45 | 6.0 | 2.50 | 55 | 21.80 | 2.00 | 0.6*45° |
The width (W) can be customized according to your needs
| Part No. | L/mm | S/mm | α° | β° | L1/mm | R/mm |
|---|---|---|---|---|---|---|
| ST-B-6028-65-25 | 6.0 | 2.80 | 65 | 25.00 | 1.50 | 0.50 |
| ST-B-6030-65-25 | 6.0 | 3.00 | 65 | 25.00 | 1.50 | 0.50 |
| ST-B-6032-65-25 | 6.0 | 3.20 | 65 | 25.00 | 1.50 | 0.50 |
| ST-B-6218-62-15 | 6.2 | 1.80 | 62 | 15.00 | 2.60 | 0.50 |
| ST-B-6219-60-20 | 6.2 | 1.90 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-6219-60-20L | 6.2 | 1.90 | 60 | 20.00 | 1.65 | 0.50 |
| ST-B-6220-60-20 | 6.2 | 2.00 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-6318-60-20 | 6.3 | 1.80 | 60 | 20.00 | 2.00 | 0.50 |
| ST-B-6319-61-1918 | 6.3 | 1.90 | 61 | 19.18 | 2.30 | 0.50 |
| ST-B-6320-57-23 | 6.3 | 2.00 | 57 | 23.00 | 1.65 | 0.50 |
| ST-B-6320-70-20 | 6.3 | 2.00 | 70 | 20.00 | 1.90 | 0.50 |
| ST-B-6518-60-20 | 6.5 | 1.80 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-6520-60-19 | 6.5 | 2.00 | 60 | 19.00 | 2.03 | 0.50 |
| ST-B-6520-60-24 | 6.5 | 2.00 | 60 | 24.00 | 1.80 | 0.50 |
| ST-B-6520-62-17 | 6.5 | 2.00 | 62 | 17.00 | 2.30 | 0.50 |
| ST-B-6520-62-17 | 6.5 | 2.00 | 62 | 17.00 | 2.60 | 0.50 |
| ST-B-6520-70-17 | 6.5 | 2.00 | 70 | 17.00 | 2.30 | 0.50 |
| ST-B-6520-70-20L | 6.5 | 2.00 | 70 | 20.00 | 1.10 | 0.50 |
| ST-B-6520-70-20 | 6.5 | 2.00 | 70 | 20.00 | 1.60 | 0.50 |
| ST-B-6520-70-20R45 | 6.5 | 2.00 | 70 | 20.00 | 1.60 | 0.5*45° |
| ST-B-6520-70-20L2 | 6.5 | 2.00 | 70 | 20.00 | 1.92 | 0.50 |
| ST-B-65205-70-20 | 6.5 | 2.05 | 70 | 20.00 | 1.92 | 0.50 |
| ST-B-6520-70-25 | 6.5 | 2.00 | 70 | 25.00 | 1.50 | 0.50 |
| ST-B-6521-60-20 | 6.5 | 2.10 | 60 | 20.00 | 2.50 | 0.50 |
| ST-B-6521-60-32 | 6.5 | 2.10 | 60 | 32.00 | 1.25 | 0.50 |
| ST-B-6521-68-17 | 6.5 | 2.10 | 68 | 17.00 | 2.50 | 0.50 |
| ST-B-6521-70-20 | 6.5 | 2.10 | 70 | 20.00 | 1.60 | 0.50 |
| ST-B-6521-70-20L | 6.5 | 2.10 | 70 | 20.00 | 1.92 | 0.50 |
| ST-B-6522-60-20 | 6.5 | 2.20 | 60 | 20.00 | 1.60 | 0.50 |
| ST-B-6522-60-22 | 6.5 | 2.20 | 60 | 22.00 | 2.50 | 0.50 |
| ST-B-6522-60-24 | 6.5 | 2.20 | 60 | 24.00 | 2.00 | 0.50 |
| ST-B-6522-65-14 | 6.5 | 2.20 | 65 | 14.00 | 2.80 | 0.50 |
| ST-B-6523-65-17 | 6.5 | 2.30 | 65 | 17.00 | 2.50 | 0.50 |
| ST-B-6524-70-20 | 6.5 | 2.40 | 70 | 20.00 | 1.60 | 0.50 |
| ST-B-6526-70-28 | 6.5 | 2.60 | 70 | 28.00 | 2.40 | 0.50 |
| ST-B-6622-60-25 | 6.6 | 2.20 | 60 | 25.00 | 1.93 | 0.50 |
| ST-B-6718-60-20 | 6.7 | 1.80 | 60 | 20.00 | 1.40 | 0.50 |
| ST-B-6720-60-20 | 6.7 | 2.00 | 60 | 20.00 | 1.60 | 0.50 |
| ST-B-6720-65-20 | 6.7 | 2.00 | 65 | 20.00 | 2.15 | 0.50 |
| ST-B-6820-62-45 | 6.8 | 2.00 | 62 | 45.00 | 0.80 | 0.50 |
| ST-B-6820-65-20 | 6.8 | 2.00 | 65 | 20.00 | 1.92 | 0.50 |
| ST-B-6822-65-20 | 6.8 | 2.20 | 65 | 20.00 | 1.40 | 0.50 |
| ST-B-6825-60-316 | 6.8 | 2.50 | 60 | 31.60 | 1.30 | 0.50 |
| ST-B-7016-62-16 | 7.0 | 1.60 | 62 | 16.00 | 3.50 | 0.50 |
| ST-B-7018-60-20 | 7.0 | 1.80 | 60 | 20.00 | 1.37 | 0.50 |
| ST-B-7018-60-20LR45 | 7.0 | 1.80 | 60 | 20.00 | 1.65 | 0.5*45° |
| ST-B-70205-70-23 | 7.0 | 2.05 | 70 | 23.00 | 1.80 | 0.50 |
| ST-B-7020-60-20 | 7.0 | 2.00 | 60 | 20.00 | 1.60 | 0.50 |
| ST-B-7020-60-24 | 7.0 | 2.00 | 60 | 24.00 | 2.00 | 0.50 |
| ST-B-7020-60-28 | 7.0 | 2.00 | 60 | 28.00 | 1.50 | 0.50 |
| ST-B-7020-62-45 | 7.0 | 2.00 | 62 | 45.00 | 0.80 | 0.50 |
| ST-B-7020-65-15R45 | 7.0 | 2.00 | 65 | 15.00 | 3.00 | 0.5*45° |
| ST-B-7020-65-20 | 7.0 | 2.00 | 65 | 20.00 | 2.15 | 0.50 |
| ST-B-7021-57-23 | 7.0 | 2.10 | 57 | 23.00 | 1.88 | 0.50 |
| ST-B-7021-60-20 | 7.0 | 2.10 | 60 | 20.00 | 2.20 | 0.50 |
| ST-B-7021-60-24 | 7.0 | 2.10 | 60 | 24.00 | 1.90 | 0.50 |
| ST-B-7021-62-17 | 7.0 | 2.10 | 62 | 17.00 | 3.00 | 0.50 |
| ST-B-7021-62-20 | 7.0 | 2.10 | 62 | 20.00 | 1.10 | 0.50 |
| ST-B-7022-57-23 | 7.0 | 2.20 | 57 | 23.00 | 1.88 | 0.50 |
| ST-B-7022-60-20 | 7.0 | 2.20 | 60 | 20.00 | 2.20 | 0.80 |
| ST-B-7022-60-20L | 7.0 | 2.20 | 60 | 20.00 | 2.80 | 0.50 |
| ST-B-7022-62-20 | 7.0 | 2.20 | 62 | 20.00 | 1.10 | 0.50 |
| ST-B-7022-62-20R45 | 7.0 | 2.20 | 62 | 20.00 | 2.01 | 0.5*45° |
| ST-B-7022-70-20 | 7.0 | 2.20 | 70 | 20.00 | 2.02 | 0.50 |
| ST-B-7023-57-23 | 7.0 | 2.30 | 57 | 23.00 | 1.88 | 0.50 |
| ST-B-7023-60-20 | 7.0 | 2.30 | 60 | 20.00 | 1.60 | 0.50 |
| ST-B-7023-60-20L | 7.0 | 2.30 | 60 | 20.00 | 2.15 | 0.50 |
| ST-B-7023-60-25 | 7.0 | 2.30 | 60 | 25.00 | 2.14 | 0.50 |
| ST-B-7023-62-20R45 | 7.0 | 2.30 | 62 | 20.00 | 2.47 | 0.5*45° |
| ST-B-7023-62-20 | 7.0 | 2.30 | 62 | 20.00 | 2.90 | 0.50 |
| ST-B-7023-65-20 | 7.0 | 2.30 | 65 | 20.00 | 2.50 | 0.50 |
| ST-B-7023-70-20 | 7.0 | 2.30 | 70 | 20.00 | 1.60 | 0.50 |
| ST-B-7025-60-32 | 7.0 | 2.50 | 60 | 32.00 | 1.30 | 0.50 |
| ST-B-7025-62-19 | 7.0 | 2.50 | 62 | 19.00 | 3.50 | 0.50 |
| ST-B-7025-65-22 | 7.0 | 2.50 | 65 | 22.00 | 2.50 | 0.50 |
| ST-B-7025-70-20 | 7.0 | 2.50 | 70 | 20.00 | 1.80 | 0.50 |
| ST-B-7025-67-286 | 7.0 | 2.50 | 67 | 28.60 | 2.20 | 0.30 |
| ST-B-7030-60-30 | 7.0 | 3.00 | 60 | 30.00 | 1.39 | 0.50 |
| ST-B-7030-80-20R45 | 7.0 | 3.00 | 80 | 20.00 | 3.30 | 0.5*45° |
| ST-B-7030-80-40R45 | 7.0 | 3.00 | 80 | 40.00 | 1.40 | 0.5*45° |
| ST-B-7220-65-25 | 7.2 | 2.00 | 65 | 25.00 | 2.14 | 0.50 |
| ST-B-7222-65-25R45 | 7.2 | 2.20 | 65 | 25.00 | 2.14 | 0.5*45° |
| ST-B-7424-65-25 | 7.4 | 2.40 | 65 | 25.00 | 2.36 | 0.50 |
| ST-B-7520-62-45 | 7.5 | 2.00 | 62 | 45.00 | 0.70 | 0.50 |
| ST-B-7522-60-20 | 7.5 | 2.20 | 60 | 20.00 | 1.80 | 0.50 |
| ST-B-7522-70-16 | 7.5 | 2.20 | 70 | 16.00 | 2.44 | 0.50 |
| ST-B-7523-60-18 | 7.5 | 2.30 | 60 | 18.00 | 3.00 | 0.50 |
| ST-B-7523-60-20 | 7.5 | 2.30 | 60 | 20.00 | 2.80 | 0.50 |
| ST-B-7523-65-27 | 7.5 | 2.30 | 65 | 27.00 | 2.50 | 0.50 |
| ST-B-7524-60-27 | 7.5 | 2.40 | 60 | 27.00 | 2.16 | 0.50 |
| ST-B-7525-65-24 | 7.5 | 2.50 | 65 | 24.00 | 2.50 | 0.50 |
| ST-B-7525-65-30 | 7.5 | 2.50 | 65 | 30.00 | 1.73 | 0.50 |
| ST-B-7822-60-20 | 7.8 | 2.20 | 60 | 20.00 | 2.20 | 0.50 |
| ST-B-7822-60-24 | 7.8 | 2.20 | 60 | 24.00 | 2.47 | 0.50 |
| ST-B-8022-60-16 | 8.0 | 2.20 | 60 | 16.00 | 2.44 | 0.50 |
| ST-B-8022-60-19 | 8.0 | 2.20 | 60 | 19.00 | 2.03 | 0.50 |
| ST-B-8022-65-22 | 8.0 | 2.20 | 65 | 22.00 | 2.00 | 0.50 |
| ST-B-8022-70-16 | 8.0 | 2.20 | 70 | 16.00 | 2.44 | 0.50 |
| ST-B-8022-70-19 | 8.0 | 2.20 | 70 | 19.00 | 2.03 | 0.50 |
| ST-B-8022-75-22 | 8.0 | 2.20 | 75 | 22.00 | 2.00 | 0.50 |
| ST-B-8023-60-20 | 8.0 | 2.30 | 60 | 20.00 | 2.00 | 0.50 |
| ST-B-8023-62-15 | 8.0 | 2.30 | 62 | 15.00 | 4.00 | 0.50 |
| ST-B-8023-62-34 | 8.0 | 2.30 | 62 | 34.00 | 1.19 | 0.50 |
| ST-B-8023-62-34LR | 8.0 | 2.30 | 62 | 34.00 | 1.40 | 1.00 |
| ST-B-8023-65-20 | 8.0 | 2.30 | 65 | 20.00 | 2.47 | 0.50 |
| ST-B-8025-60-22 | 8.0 | 2.50 | 60 | 22.00 | 2.50 | 0.50 |
| ST-B-8025-62-17 | 8.0 | 2.50 | 62 | 17.00 | 4.00 | 0.50 |
| ST-B-8025-62-20R45 | 8.0 | 2.50 | 62 | 20.00 | 2.61 | 0.5*45° |
| ST-B-8025-65-256 | 8.0 | 2.50 | 65 | 25.60 | 2.50 | 0.50 |
| ST-B-8028-60-327 | 8.0 | 2.80 | 60 | 32.70 | 1.40 | 0.50 |
| ST-B-8028-62-17 | 8.0 | 2.80 | 62 | 17.00 | 4.00 | 0.50 |
| ST-B-8028-62-20 | 8.0 | 2.80 | 62 | 20.00 | 2.61 | 0.50 |
| ST-B-8030-60-35R45 | 8.0 | 3.00 | 60 | 35.00 | 1.43 | 0.5*45° |
| ST-B-8223-62-25 | 8.2 | 2.30 | 62 | 25.00 | 1.50 | 0.50 |
| ST-B-8520-62-25 | 8.5 | 2.00 | 62 | 25.00 | 1.50 | 0.50 |
| ST-B-8523-62-23 | 8.5 | 2.30 | 62 | 23.00 | 2.36 | 0.50 |
| ST-B-8523-62-25 | 8.5 | 2.30 | 62 | 25.00 | 1.50 | 0.50 |
| ST-B-8524-60-25 | 8.5 | 2.40 | 60 | 25.00 | 1.71 | 0.50 |
| ST-B-8525-60-20 | 8.5 | 2.50 | 60 | 20.00 | 2.00 | 0.50 |
| ST-B-8525-60-25 | 8.5 | 2.50 | 60 | 25.00 | 3.00 | 0.50 |
| ST-B-8525-62-20R45 | 8.5 | 2.50 | 62 | 20.00 | 2.61 | 0.5*45° |
| ST-B-8525-62-20 | 8.5 | 2.50 | 62 | 20.00 | 3.02 | 0.50 |
| ST-B-8525-70-20 | 8.5 | 2.50 | 70 | 20.00 | 3.02 | 0.50 |
| ST-B-8528-62-20R45 | 8.5 | 2.80 | 62 | 20.00 | 2.61 | 1.0*45° |
| ST-B-8528-65-20 | 8.5 | 2.80 | 65 | 20.00 | 2.20 | 0.50 |
| ST-B-8528-70-10 | 8.5 | 2.80 | 70 | 10.00 | 2.50 | 1.25 |
| ST-B-8530-62-20 | 8.5 | 3.00 | 62 | 20.00 | 4.40 | 0.50 |
| ST-B-9021-57-23 | 9.0 | 2.10 | 57 | 23.00 | 1.65 | 0.50 |
| ST-B-9025-60-20 | 9.0 | 2.50 | 60 | 20.00 | 3.20 | 0.50 |
| ST-B-9025-70-33 | 9.0 | 2.50 | 70 | 33.00 | 1.60 | 0.50 |
| ST-B-9026-60-20 | 9.0 | 2.60 | 60 | 20.00 | 3.00 | 1.00 |
| ST-B-9027-66-20 | 9.0 | 2.70 | 66 | 20.00 | 3.19 | 0.50 |
| ST-B-9028-60-20 | 9.0 | 2.80 | 60 | 20.00 | 2.30 | 0.50 |
| ST-B-9028-70-10 | 9.0 | 2.80 | 70 | 10.00 | 2.50 | 1.25 |
| ST-B-9030-60-20 | 9.0 | 3.00 | 60 | 20.00 | 2.30 | 0.60 |
| ST-B-9030-60-30R45 | 9.0 | 3.00 | 60 | 30.00 | 1.39 | 0.5*45° |
| ST-B-9030-62-21 | 9.0 | 3.00 | 62 | 21.00 | 4.00 | 0.50 |
| ST-B-9226-60-25 | 9.2 | 2.60 | 60 | 25.00 | 1.93 | 0.50 |
| ST-B-9528-60-20 | 9.5 | 2.80 | 60 | 20.00 | 2.80 | 1.00 |
| ST-B-9530-60-20 | 9.5 | 3.00 | 60 | 20.00 | 3.10 | 0.50 |
| ST-B-9530-62-20 | 9.5 | 3.00 | 62 | 20.00 | 2.75 | 0.50 |
| ST-B-9830-60-20 | 9.8 | 3.00 | 60 | 20.00 | 2.80 | 0.50 |
| ST-B-10025-60-20 | 10.0 | 2.50 | 60 | 20.00 | 3.20 | 0.50 |
| ST-B-10028-60-20 | 10.0 | 2.80 | 60 | 20.00 | 3.10 | 0.50 |
| ST-B-10028-60-20L | 10.0 | 2.80 | 60 | 20.00 | 3.30 | 0.50 |
| ST-B-10028-62-20 | 10.0 | 2.80 | 62 | 20.00 | 2.75 | 0.50 |
| ST-B-10030-62-20R45 | 10.0 | 3.00 | 62 | 20.00 | 2.75 | 0.5*45° |
| ST-B-10525-62-45 | 10.5 | 2.50 | 62 | 45.00 | 1.20 | 0.50 |
| ST-B-10528-67-20 | 10.5 | 2.80 | 67 | 20.00 | 3.30 | 0.50 |
| ST-B-10528-70-20 | 10.5 | 2.80 | 70 | 20.00 | 3.57 | 0.80 |
| ST-B-10530-60-20 | 10.5 | 3.00 | 60 | 20.00 | 2.28 | 0.50 |
| ST-B-10530-60-25R45 | 10.5 | 3.00 | 60 | 25.00 | 3.22 | 0.5*45° |
| ST-B-10530-60-40 | 10.5 | 3.00 | 60 | 40.00 | 1.55 | 0.50 |
| ST-B-10535-60-20 | 10.5 | 3.50 | 60 | 20.00 | 2.80 | 0.50 |
| ST-B-10535-60-30 | 10.5 | 3.50 | 60 | 30.00 | 2.80 | 0.50 |
| ST-B-11028-70-18 | 11.0 | 2.80 | 70 | 18.00 | 4.00 | / |
| ST-B-11530-60-20 | 11.5 | 3.00 | 60 | 20.00 | 2.28 | 0.50 |
| ST-B-11535-60-20R45 | 11.5 | 3.50 | 60 | 20.00 | 5.50 | 0.5*45° |
| ST-B-12034-55-45 | 12.0 | 3.40 | 55 | 45.00 | 1.00 | 0.50 |
| ST-B-12040-62-45 | 12.0 | 4.00 | 62 | 45.00 | 2.00 | / |
| ST-B-12623-55-12 | 12.6 | 2.30 | 55 | 12.00 | 4.33 | 0.50 |
| ST-B-12625-55-12 | 12.6 | 2.50 | 55 | 12.00 | 4.33 | 0.50 |
| ST-B-12630-55-12 | 12.6 | 3.00 | 55 | 12.00 | 4.33 | 0.50 |
| ST-B-12633-55-12 | 12.6 | 3.30 | 55 | 12.00 | 4.33 | 0.50 |
| ST-B-12635-55-12 | 12.6 | 3.50 | 55 | 12.00 | 4.33 | 0.50 |
| ST-B-12638-55-12 | 12.6 | 3.80 | 55 | 12.00 | 4.33 | 0.50 |
| ST-B-12640-55-12 | 12.6 | 4.00 | 55 | 12.00 | 4.33 | 0.50 |
| ST-B-12642-55-12 | 12.6 | 4.20 | 55 | 12.00 | 4.33 | 1.00 |
| ST-B-12840-70-30 | 12.8 | 4.00 | 70 | 30.00 | 3.00 | 0.50 |
| ST-B-13040-60-30 | 13.0 | 4.00 | 60 | 30.00 | 3.00 | 0.50 |
| ST-B-13040-62-45 | 13.0 | 4.00 | 62 | 45.00 | 2.00 | / |
| ST-B-13040-76-266 | 13.0 | 4.00 | 76 | 26.60 | 1.80 | / |
| ST-B-14035-55-30 | 14.0 | 3.50 | 55 | 30.00 | 4.60 | 0.50 |
Grades for Tungsten Carbide Saw Tips
| Grade | ISO Code | Grain Size | Density {g/cm³} |
Hardness {HRA} |
TRS {N/mm} |
Application Recommendation |
|---|---|---|---|---|---|---|
| General Grades | ||||||
| YG6 | K20 | Medium | 14.85-15.05 | 91.0 | 2100 | For ordinary wood |
| YG8 | K30 | Medium | 14.60-14.85 | 90.0 | 2400 | For ordinary wood, also for aluminium |
| TC24S | K40 | Coarse | 14.50-14.80 | 88.5 | 2400 | For recycling wood, especially wood with some nails and stones |
| TM22 | K20 | Medium | 14.65-14.85 | 91.0 | 2200 | For hard wood, also for aluminium alloys |
| YG6X | K10 | Fine | 14.75-14.95 | 92.0 | 2000 | Specially for wood |
| YG8X | K10 | Fine | 14.60-14.85 | 91.5 | 2200 | For both wood and aluminium alloys |
| High-perperties Grades | ||||||
| TF30 | K10 | Fine | 14.70-14.85 | 92.0 | 3000 | Specially for hard wood |
| TF24 | K10 | Fine | 14.80-15.05 | 92.2 | 2400 | Specially for hard wood |
| TF30A | K20 | Fine | 14.60-14.80 | 91.5 | 3000 | Specially for aluminium alloys |
| TS30C | K05 | Submicron | 14.70-14.95 | 93.2 | ≥3000 | For high density wood and aluminium-plastic composite |
| TS30A | K10 | Submicron | 14.50-14.80 | 92.5 | ≥3000 | Specially for aluminium alloys |
| TS30S | K10 | Submicron | 14.25-14.55 | 92.0 | ≥3050 | For stone and aluminium alloys |
| TS20-1 | K10 | Submicron | 15.20-15.35 | 95.5 | ≥2000 | For plywood, density board and sandwich board |
| TS20-2 | K10 | Submicron | 15.10-15.25 | 95.5 | ≥2000 | For plywood, density board and sandwich board |
| TS20-3 | K01 | Submicron | 15.00-15.20 | 95.0 | ≥2000 | For particle board, laminated board, density board, and composite material |
| TS20-4 | K01 | Submicron | 14.90-15.10 | 94.5 | ≥2000 | For particle board, laminated board, density board, and composite material |
| TS24 | K10 | Submicron | 14.70-14.85 | 94.0 | ≥2400 | For plywood, density board and sandwich board |
| TS26 | K05 | Submicron | 14.90-15.10 | 93.6 | ≥2600 | For particle board, laminated board, density board, and composite material |
| TM22H | P40 | Medium | 12.80-13.30 | 90.0 | ≥2200 | For large saw blades |
| TM21 | M30 | Medium | 12.70-13.30 | 91.0 | ≥2100 | For the sawing of steels and stainless steels |
| TM20 | M20 | Medium | 12.85-13.35 | 91.5 | ≥2050 | For the sawing of cast iron and steel plates |
- Contact
Our team is ready to provide support
Truer Carbide is committed to providing efficient solutions to problems. Each team member has the expertise and experience to quickly understand and meet your needs.