- Carbide Rods
Grade properties
| Grade | ISO Code | Grain Size {um} | Cobalt Content {wt%} | Density {g/cm³} | Hardness{HAR} | TRS{N/mm²} |
|---|---|---|---|---|---|---|
| TS710 | K20-K30 | 0.7 | 10.0 | 14.45 | 91.8 | 3800 |
| TS610 | K20-K30 | 0.6 | 10.0 | 14.45 | 92.2 | 4000 |
| TU412 | K30-K40 | 0.4 | 12.0 | 14.12 | 92.5 | 4200 |
| TU409 | K10-K20 | 0.4 | 9.0 | 14.50 | 93.2 | 4000 |
| TU406 | K05-K10 | 0.4 | 6.0 | 14.8 | 94.1 | 3800 |
| TN209 | K20-K30 | 0.2 | 9.0 | 14.45 | 94.0 | 4200 |
| TS715 | K30-K40 | 0.7 | 15.0 | 13.98 | 89.0 | 4500 |
| TU408 | K10-K20 | 0.4 | 8.5 | 14.52 | 93.5 | 3800 |
| TU510 | K20-K40 | 0.5 | 10.3 | 14.30 | 92.3 | 4200 |
| TU512A | K20-K40 | 0.5 | 12.0 | 14.10 | 92.0 | 4200 |
| TU512B | K20-K40 | 0.5 | 12.0 | 14.10 | 91.2 | 4500 |
| TS606 | K10 | 0.6 | 6.0 | 14.90 | 93.3 | 3800 |
| TS613 | K30-K40 | 0.6 | 13.5 | 14.08 | 90.5 | 4000 |
| TM1512 | K30-K40 | 1.0-2.0 | 12.5 | 14.10 | 89.5 | 3600 |
| TM2214 | K40-K50 | 1.5-3.0 | 14.0 | 14.00 | 88.5 | 3700 |
| TC2406 | 0.8-4.0 | 6.0 | 14.80 | 90.5 | 2900 | |
| TF1113A | 0.8-1.5 | 13.0 | 14.20 | 90.0 | 3000 | |
| TF1113B | 0.8-1.5 | 13.5 | 14.00 | 90.0 | 3600 | |
| TM1513 | 1.0-2.0 | 13.0 | 14.20 | 89.5 | 3800 | |
| TF1312 | 0.8-1.8 | 12.0 | 14.30 | 90.0 | 3500 | |
| TC2515 | 1.0-4.0 | 15.0 | 13.90 | 87.5 | 3500 |
Solid carbide rods are another type of carbide bar that is widely used in machining applications. These rods are made from a single piece of tungsten carbide material, making them highly durable and resistant to wear and tear . Solid carbide rods are suitable for machining a variety of materials such as steel, cast iron, and titanium alloys . They are also available in a range of diameters and lengths, making them suitable for use in various types of machinery.
Solid carbide rods are widely used for creating premium solid carbide tools, such as end mills, drills, reamers, milling cutters, stamping, and measuring tools in different industries. We supply both unground and ground solid carbide rods with top and consistent quality in varied grades. If you would like to learn more about our carbide grades, please find above the grade page.
A comprehensive standard selection of solid carbide rods in various dimensions is available clieck here, but other sizes, tolerances & configurations also available on request.
Carbide rods with the kind of internal cooling hole can provide much more efficient chip evacuation and deeper hole making capabilities, widely used in drills, reamers, carbide holders. We supply both unground and ground carbide rods with one cooling hole in varied grades. If you would like to learn more about our carbide grades, please find above the grade page.
A comprehensive standard selection of carbide rods with one straight cooling hole in various dimensions is available click here, but other sizes, tolerances & configurations also available on request.
The 2-hole design on the carbide rod allows for increased coolant flow and better chip evacuation compared to a single-hole design. This helps to improve tool life and cutting performance, especially in high-speed machining operations where heat and chip buildup can be a problem, widely used in drills, reamers, carbide holders. We supply both unground and ground carbide rods with two cooling holes in varied grades. If you would like to learn more about our carbide grades, please find above the grade page.
A comprehensive standard selection of carbide rods with two straight cooling holes in various dimensions is available click here, but other sizes, tolerances & configurations also available on request.
Carbide rods with helical coolant holes greatly avoid the early wear and failure of the tungsten carbide tools during high-speed machining by the coolant in helical holes to reduce the temperature evenly, widely used in cutting and machining applications. The helix angle determines the efficiency of chip evacuation during the cutting process, which is critical for preventing tool wear and damage to the workpiece. We supply 30°& 40°helix,and unground & ground carbide rods with two helical cooling holes in varied grades. If you would like to learn more about our carbide grades, please find above the grade page.
A comprehensive standard selection of carbide rods with helical cooling holes in various dimensions is available click here, but other sizes, tolerances & configurations also available on request.
One end of carbide rods is chamfered, which means that it is ground at an angle to create a beveled edge. This chamfered edge helps to reduce the amount of chipping and breakage that can occur during the drilling or milling process. It also improves the accuracy and precision of the cutting operation by creating a clean and smooth entry point for the tool.The carbide rod is ground to precise tolerances to ensure that it meets the exact specifications required for the specific application. This includes the diameter of the rod, the length of the rod, and the chamfer angle.
We supply chamfered carbide rods in varied tungsten carabide grades. If you would like to learn more about our carbide grades, please find above the grade page.
A comprehensive standard selection of carbide rods with chamfered end in various dimensions is available click here, but other sizes, tolerances & configurations also available on request.
